Swimming Pool Equipment Repair in Weatherford, Tx

Weatherford Pool Equipment Repair Services 

Our team handles pool equipment repair across Weatherford with skill built on over 22 years of experience. We fix pumps, perform heater repair, service filters, and solve plumbing leaks fast.

We know swimming pools inside out after completing more than 42,000 service calls. Our licensed and insured technicians show up as promised and work on all brands or models. If your system runs on salt water or needs electrical troubleshooting, we have the know-how to get things running smoothly again.

Let us help keep your pool the best spot in town.

Comprehensive Pool Pump Repairs

We diagnose pool pump issues fast and fix them right the first time. Don’t let a faulty pump steal your swim—let’s get your water moving again.

How do you troubleshoot and fix pool pump problems?

We start pump repair by checking if the pump turns on and runs without unusual noises. A humming or screeching sound can point to a motor issue, bad bearings, or a jammed impeller.

If we see leaks near the seal plate or notice air bubbles in the pool returns, these often signal bad gaskets or loose fittings.

Our team looks for debris clogging the strainer basket and checks that pool plumbing lines are clear. We examine electrical connections because weak power supply can cause poor performance.

Sometimes, a worn-out capacitor stops pumps from starting at all. For filter cleaning problems linked to low pressure, we test both the skimmer and suction side for blockages before pulling apart plumbing joints as needed.

When should you replace or install a new pool pump?

A pool pump should work smoothly, not sound like a freight train. If it starts making loud grinding noises, runs hot, or leaks water, we need to talk about replacing it. Rising electric bills often point to old pumps running less efficiently than new models.

Sometimes the motor just quits and refuses all repairs no matter what tools we throw at it.

If your pump turns on and off by itself or trips the circuit breaker in your pool electrical system, that’s a red flag. Modern pumps with automation save money and energy compared to older single-speed units from ten years ago.

Installing a new model can also keep salt water systems steady since newer pumps manage flow better. Most pool owners see fewer headaches and lower repair costs once they upgrade their setup instead of patching problems again and again.

Swimming Pool Filter Maintenance and Repair

We clean and repair pool filters to keep your water clear. Let’s tackle dirty or broken filters before small problems grow bigger.

How often should you clean and service your pool filter?

Pool filters need regular attention. We clean most cartridge filters every three to four months. Sand and DE filters usually require backwashing once a month during swim season. If you notice cloudy water, it is time for a checkup sooner.

High use, heavy rain, or lots of debris call for more frequent service. Keeping your pool filter in shape helps your pool automation system run better and keeps repairs away from the door longer.

Pool salt water systems also work best with a clean filter on duty. A dirty or clogged filter works as well as socks in sandals—nobody wants that!

What types of pool filters do we service?

We repair and maintain all major types of pool filters. Our team handles cartridge, sand, and DE (diatomaceous earth) filters. Some pools use cartridge systems for easy cleaning. Others rely on sand filters that need regular backwashing to stay clean.

Many owners choose DE filters because they catch the smallest dirt particles.

Our techs inspect grids, replace worn cartridges, and fix leaking filter tanks. We deal with clogs or pressure issues fast so you get clear water again without delay. Let us keep your system running smooth while you enjoy swimming instead of worrying about equipment headaches or filter failures.

Pool Heater Diagnostics and Repair

We test your pool heater with sharp eyes and the right tools. Let’s get it working so you can enjoy warm swims even when Texas surprises us with a cold snap.

How do you diagnose and repair different pool heater brands?

We start by checking the basics—power, gas supply, and thermostat settings. Every pool heater brand has its own controls and quirks. Some models show error codes that help us zero in fast.

Others make us hunt for the problem, like a detective with a magnifying glass looking for clues.

We clean burners or heat exchangers if they’re dirty. We replace faulty control boards or sensors as needed. If we find leaks, we fix seals or connections right away. For electric heaters, we test each heating element and wiring section by section to track down what’s gone wrong.

Pool owners count on warm water—we get your system running again so you can enjoy it without missing a beat.

Pool plumbing issues often go hand-in-hand with heater repairs, so let’s talk about how we handle those next.

Pool Plumbing and Leak Solutions

We fix leaky pipes and cracked plumbing fast, so your pool stays full and fun—click to learn how we keep the water where it belongs!

How do you repair or replace pool plumbing components?

We first shut off all power and water to prevent accidents. Next, we locate the leak or broken pipe using pressure testing and visual checks. Once we find damaged pipes, valves, or fittings, we cut out the faulty section with a saw.

We measure and install new PVC pipes or connectors that match your pool’s needs.

After gluing everything together with waterproof cement, we let it dry fully before turning water back on. For cracked skimmers or stubborn leaks near pool mastic repair areas, we remove old sealant and add fresh material to stop future problems.

Each step safeguards your equipment from costly damage down the road—no need for guesswork or band-aid fixes.

Pool Electrical System Repairs

We repair and upgrade pool automation systems with precision. Our team handles wiring issues fast, so you can enjoy worry-free swims.

What services are included for automation systems and control panels?

We install, repair, and upgrade pool automation systems. Our team connects pumps, heaters, lights, and cleaners to your control panels so you can manage your pool with a single touch.

We troubleshoot malfunctioning timers and replace old keypads or circuit boards fast. Programming new schedules for energy savings is part of our service.

If your freeze protection or remote controls stop working, we fix those too. We check all wiring for safety and test every feature before finishing the job. Whether you have a simple timer or full smart home integration, we keep things running smoothly without any guesswork required on your end.

Salt Water System Repairs and Maintenance

Salt water pool issues can sneak up on anyone. Let’s spot problems early and keep your system running smoother than a summer cannonball.

What common issues affect salt water pool systems?

We often see salt cells get clogged with calcium buildup, which causes weak chlorine production. Power boards can short out if moisture sneaks into the system box. Salt levels may drop too low during hot Texas months or heavy rain.

Corrosion sometimes eats away at handrails and ladders because of high salt content in the water.

Sometimes sensors fail, so our pool equipment repair team checks everything using reliable tools. Cloudy water and itchy skin usually mean a problem with the generator or low salt readings.

We keep an eye out for error codes or blinking lights on control panels to catch trouble early for Weatherford pool owners.

Regular Pool Equipment Maintenance Plans

We offer simple pool care plans that keep your equipment healthy—check out our options and find the right fit for your backyard.

What weekly pool service options are available?

Our weekly pool service covers skimming, vacuuming, and brushing every inch of your pool. We test the water chemistry using up-to-date digital tools. Our team balances chlorine, pH levels, and alkalinity so your water stays clean and safe.

We empty baskets, check pumps, inspect filters for damage or clogs, and scan for early signs of leaks or equipment trouble. Every visit comes with a full report detailing what we did and any issues spotted that week.

You can trust us to help keep your pool sparkling without lifting a finger.

Why Choose WaterTex Pools in Weatherford

We treat every pool like our neighbor’s backyard. Our family brings skill and care to every job, so you can relax while we handle the hard stuff.

What makes WaterTex Pools’ team licensed, insured, and experienced?

Our technicians carry the required licenses for pool equipment repair in Dallas-Fort Worth. Each member has gone through strict background checks and professional training. We stay insured to protect homeowners as well as our own team on every job site.

Industry certifications back up our skills with pumps, heaters, filters, and automation systems.

We face real-world pool challenges daily and tackle problems from simple repairs to complex wiring issues. Years of hands-on work have sharpened both our troubleshooting and installation abilities.

Ongoing training keeps us sharp about new pool technology in Weatherford. Learn how being family-owned brings extra care to each customer we serve next.

How does being family-owned and locally operated benefit customers?

We cover every box with our licensed and insured team, but there is more to our service. As a family-owned pool equipment repair business in Dallas-Fort Worth, we treat your pool like it belongs to us.

We know the Weatherford area well because we live and work here too. Fast response times are second nature for us since we’re right around the corner.

Local roots mean you talk to real people who care about your satisfaction. We keep your name and the quirks of your swimming pool system in mind. If something isn’t quite right, you can call and get an answer without jumping through hoops or waiting on hold forever.

Every repair or maintenance plan comes with accountability; neighbors look out for each other in this community so we do too—no shortcuts, no excuses.

Service Area Coverage in Weatherford and Surrounding Communities

Pool owners in Weatherford trust us to handle repairs and maintenance throughout the city. We serve neighborhoods like Brock, Hudson Oaks, Willow Park, and Aledo. Our team also reaches out to Poolville, Annetta North, and Millsap.

If you live near I-20 or just outside town limits, we show up ready for any pool equipment problem.

Our service trucks carry the tools needed for quick repairs all across Parker County. Busy families count on us from downtown Weatherford to farms past Center Point Road. We bring parts and know-how straight to your backyard so you do not waste a minute of swim season waiting around.

Give us a call; chances are high we already help your neighbors keep their pools safe and fun year-round!

How to Schedule Your Pool Equipment Service

Call us or use our website to book your pool equipment service. We make it quick and easy, even if you have a packed schedule. Let us know what issues you’re seeing with your pump, filter, heater, or plumbing.

Our team will help pick the right date and time that works best for you.

We confirm appointments by phone or email so there’s no confusion. If anything changes on your end, just give us a heads up and we’ll work with you to reschedule fast. Next up, get details on how to reach out for reliable equipment repair in Weatherford and beyond.

Contact WaterTex Pools for Reliable Equipment Repair

Let’s keep your pool running smoothly all year. Our team is ready to tackle any equipment problem, big or small. Reach out to WaterTex Pools today for honest and friendly service.

Let us help you dive back into comfort and fun.